1. MikroTik load balancing over multiple gateways has been shown step by step in this article. Enable Dual WAN. Viprinet kombiniert beliebige Leitungstypen, ob ADSL , SDSL , UMTS/HSPA+ oder LTE und lässt diese zum LAN hin als eine einzige Leitung erscheinen.
When you configure multiple external interfaces, you have several options to control which interface an outgoing packet uses. With the different modes you select, different setting fields will show up.
Fig.08: Dual wan load balancer config Where, Set Group Name to “WanLoadBalancer“. Easy to set up, responsive UI. Set Gateway Priority for both gateways to “Tier 1“. There are WAN, USB, Ethernet LAN for your options.
3.1 Select Failover mode to use a secondary WAN for backup network access. Since installation this has been 100% trouble free.
Please note that when two gateways are on the same tier (e.g. I use it to load balance two internet connections, one from Virgin and one from Sky.
This means that on a per-connection basis, connections are routed over each WAN in a round-robin manner. With two WANs in use and x4 heavy users of web it never really gets above 10% CPU load. MikroTik Dual WAN Load Balancing with Fialover using PCC article has described how to easily configure Load Balancing and Link Redundancy network in your MikroTik Router using PCC method. About Multi-WAN Methods.
It comes complete with load balancing, failover and an easy to manage traffic ruleset. Load Balancing is a method aiming to spread traffic across multiple links to get better link usage. Dabei findet eine echte Bündelung aller verfügbaren Internetzugänge statt und nicht wie z.B.
Choose your primary WAN and secondary WAN. The multiwan package is an agent script that makes Multi-WAN configuration simple, easy to use and manageable. How to setup Dual WAN? You can choose Fail Over or Load Balance. If a feature described in this section is not available in your version of Fireware, it is a beta-only feature.
3.
No reboots. Replaced an ageing Draytek Vigor 2920n dual wan router with this. Method Per-connection Per-packet Firewall marking : Yes : Yes ECMP : Yes : No PCC : Yes : No Nth : Yes : Yes Bonding : No : Yes OSPF : Yes : No BGP : Yes : No Methods Failover.
2.
Tier 1), they will load balance.
Some of the features described in this section are only available to participants in the WatchGuard Beta program. This can be done one per-packet or per-connection basis. beim Load Balancing lediglich eine Lastverteilung auf mehrere WAN Links. MikroTik Dual WAN Load Balancing with Failover using PCC May 27, 2018 Abu Sayeed MikroTik Load Balancing , MikroTik Router Hi geek, going through this article means you are finding Load Balancing as well as Link Redundancy solution for your MikroTik network because you already have multiple WAN connections or you are planning to lease multiple WAN connections.